Thursday 11 April 2013

News: Boeing Plans To Add 2,000 Jobs By 2020

Boeing expansion could turn SC into 'aerospace hub'


Boeing's new $1 billion investment could nearly double employment at its North Charleston Dreamliner jet-manufacturing plant and help South Carolina land more aircraft suppliers, state leaders said Tuesday.
"Our state could become the aerospace hub," said state Senate Finance chairman Hugh Leatherman, R-Florence.
Boeing plans to add 2,000 jobs by 2020. That would bring Boeing's employment to 8,000 workers at its Lowcountry facility.
Noting that Boeing has exceeded its S.C. employment expectations since launching the plant in 2009, Leatherman said he thinks Boeing will add another 2,000 jobs, raising its total workforce at North Charleston to 10,000. That still would be well short of the 86,000 workers that Boeing employs at its Washington state manufacturing hub.
Hours after the deal was announced, the state Senate Finance Committee, which Leatherman heads, agreed to borrow $120 million in bonds to aid Boeing with its expansion. The incentive deal now heads to the Senate floor. Boeing received $450 million in incentives more than three years ago for its initial $750 million investment in the state.
Leatherman asked for quick passage of the bonds "to let Boeing know we appreciate their being here."

An incentives bill also was introduced Tuesday in the S.C. House.

If approved, the money will go to buy a 320-acre site that neighbors Boeing's plant at Charleston International Airport and prepare that site for construction, state Commerce Department Secretary Bobby Hitt told senators. The bonds would not pay for any buildings, Hitt said.
The state would own the site until the bonds are repaid in 15 years. The state could give Boeing the property or lease it to the company if performance goals -- $1 billion in new investment and 2,000 additional jobs -- are met within eight years, Hitt said.
In 2009, Boeing said it would hire 3,600 workers in North Charleston, surpassing that goal in 2012 -- four years ahead of the state's deadline, said company spokeswoman Candy Eslinger. The company already has invested $1 billion in North Charleston, she said.
Boeing will add workers to its North Charleston facility that builds aft-bodies of 787s and paints the aircraft, and at a new operations center to transport pieces of the aircraft to the Seattle area, where Boeing operates another plant that also assembles 787s, Eslinger said. North Charleston also will become a site where Boeing consolidates information technology work.
The expansion should help the state attract more aircraft suppliers, including some that also might do business with an Airbus plant that is opening in Alabama in 2015, Hitt said. "The action today increases the heartbeat of the suppliers looking to come to South Carolina," he said.
BMW, which has its only U.S. plant in Greer, was the largest economic-development project landed by the state before Boeing, and it has lured about 40 direct suppliers to the state, Hitt added.

The talks

Boeing had been discussing expanding in South Carolina for a few months, but talks became serious about three weeks ago, state leaders said. Company executives met with Leatherman, Hitt, House Speaker Bobby Harrell, R-Charleston, and Gov. Nikki Haley to hammer out details.
Leatherman said company and state officials met constantly, even getting together -- with Boeing's chief counsel -- on Good Friday. An agreement was reached late Thursday night, he said.
Hitt, a former BMW executive, said the deal reminded him of that German automaker's second S.C. investment. That deal, more than a decade ago, doubled BMW's employment to 4,000 and led to the creation of an auto-research facility with Clemson University. BMW now employs 7,000 workers and has invested $5.8 billion in the state, company officials said.
Harrell said the new incentives package offered Boeing amounts to about 10 percent of the company's planned investment, "a pretty good deal for the state." Local governments are expected to give the aircraft maker tax breaks as well, he said.
"I do anticipate the cheering will seriously outweigh any opposition that we may have" to the cost of the incentives, Harrell said.
One Senate Finance Committee member -- Sen. Kevin Bryant, R-Anderson -- voted against the incentives, saying he could not add $120 million to the state's debt. State Sen. Tom Davis, R-Beaufort, voted "present," saying he wanted more time to study the incentives bill.
House Ways and Means chairman Brian White, R-Anderson, said he does not have a problem with more incentives for Boeing. "They have proven that they will live up to their obligations ahead of time."
More planes?
With the expansion, Leatherman said Boeing will boost its North Charleston production of 787 jets to eight a month. The facility, which built its first 787s a year ago, now produces one 787 a month, a number that soon will increase to two. The goal is to build three jets a month in North Charleston, Eslinger said, adding Boeing is not ready to discuss an increase beyond that number.
Boeing has orders for 840 of the new jets. Made with composite materials, the jets have proven popular with airlines because they are lighter and more fuel-efficient than other commercial aircraft.
Boeing has not talked about adding production of another type of jet in South Carolina, officials said.
About 1,000 of the new jobs added in North Charleston will be engineers; the other 1,000 will be made up of production and information technology workers, state officials said. The jobs will pay $65,000 a year on average, Hitt said.
Boeing has an option to buy another 765 acres near its North Charleston plant. Combined with the 320 acres that are part of the bond deal announced Tuesday, the North Charleston facility would be about the same size as the company's manufacturing operations in the Seattle area, Eslinger said.
"If you could prove you have the workforce and can do the job, more (jobs) would be coming," U.S. Sen. Tim Scott, R-North Charleston, who helped with previous Boeing deals, said Tuesday. "The announcement says 'Phase 2,' so maybe there could be a Phase 3. They did not say this is the final phase."
The 787 took three years longer than projected to get off the ground because of production problems. Since mid-January, the aircraft has been grounded because of a problem with smoldering lithium-ion batteries. The company conducted a final test of a new battery design last week. None of the 787s that reported battery problems were built in South Carolina.
Staff writer Adam Beam and The Associated Press contributed.
By ANDREW SHAIN -- ashain@thestate.com
The original article can be found here: The State
Aerospace and aircraft manufacturers require humidity control within the manufacturing plant, along with air curtains for the hangar doors. The air contained within the hangar can be conditioned, and the need to keep out dust using the air curtain and to prevent contamination of the air whilst spraying such large aircraft.
Contact us for more information on how best to heat, humify and control the internal air conditions in large premises, such as aircraft hangars.

Monday 8 April 2013

Frico Launches New Air Curtain - UF600 Series

UF600 - new Frico air curtain for large industrial doorways


Frico, the leading supplier of air curtains in Europe, launches UF600 at ISH in Frankfurt. The new product is unique on the market, as normal air curtains can't handle very large doorways. It´s a total solution, using standard modules for the motor but everything else - the fans, ducts, nozzle, etc. are custom-built, giving exact performance for each specific doorway.


The UF600 comes in six different sizes, for doors that are from three meters high and four meters wide, to doors up to 6 meters high and 12 meters wide. The device can be installed both inside and outside and the angle of the nozzle will always point towards the cold side.

The product consists of one or two columns with air inlets, silencers and axial fans as well as a floor duct with a slot at floor level. The floor slot's width is calculated for each specific doorway in Frico´s CFD software (Computer Fluid Dynamics). The CFD analyze is also used to optimize the motor performance.

The pillars can be placed on both sides of the doorway. When two pillars are needed they will be positioned one on each side. As the air intake should be above the door opening for indoor installation, an extension of the column is sometimes necessary. Also, the UF600's nozzle slot is directed at an outward angle of about 15 degrees to compensate for the inward air flow caused by negative pressure inside the building.

Throughout a special axial fan combination, a high air rush is being generated and a high dynamic pressure is built up inside the floor duct. This pressure rushes against the internal resistance of the channel and the nozzle. The resistance can be up to 2000 Pa and therefore creates a very effective air curtain.

UF600 is using ambient air only. A huge amount of energy can be saved and it´s also possible to create a comfortable and healthy indoor climate for the staff working inside the building - even with a large and constantly open door. Not using the UF600, would mean losing a lot of warm air as a larger heating capacity for creating a comfortable indoor climate is needed.

About Frico

Frico is the leading supplier of air curtains, radiant heaters and fan heaters in Europe. Since 1932 Frico has developed and manufactured energy efficient products for a comfortable indoor climate. Today Frico is also represented in more than 70 countries by our subsidiaries, sister companies or our distributors. Head office is in Partille, outside Gothenburg, and the company is part of Systemair which has its head office in Skinnskatteberg, Sweden, approximately 3,400 employees and a turnover of SEK 4 billion.

This article first appeared on the FRICO website

Euro Controls UK Ltd are the UK distributor for Frico air curtains and fan heaters.

Thursday 7 February 2013

Electric Air Curtain Keeps Reception Warm

Euro Controls UK Ltd recently installed an electric air curtain at Broadway Studios, Hammersmith, London to overcome the problem with cold draughts in the reception area.

Employees and visitors were complaining of the problem with the cold area, and needed a quick and long term solution to the problem.





We installed a Thermoscreen C1500ENT Electric Air Curtain in to the reception area to provide the perfect barrier of air to prevent the cold draughts and to manage to the temperature inside the room.

The existing overdoor heater was removed as it was providing enough of an air barrier, and the electric air curtain was installed at 3 metres - out of the way and out site (well almost!).

If you are having problems with cold draughts in occupied spaces, contact us for a site visit and pricing.

Tuesday 27 November 2012

Triumphant Air Curtain!

As I munched on my morning yoghurt pot full of goodness in Pret, I spotted an air curtain doing the job it is supposed to be doing.

At first, the skeptic in me took one look at the door propped open with the wet floor sign and thought: ' yet another waste of energy by having an air curtain that either doesn't work or is switched off'.


However, upon closer inspection I could see people's hair blowing under the fan as they entered the store to my utter delight - 'yes!' I thought. At last, an air curtain doing its job and doing it so wonderfully!

There is hope.

What a pleasant surprise.

Spotted any air curtains recently that are actually working to create a barrier of air?

Monday 6 August 2012

FRICO Air Curtain Installation - PAL Europe

 FRICO Air Curtain Installation....


Euro Controls recently supplied Tim Jordan of Fabrite Services, based in Portsmouth, with two FRICO AD215W water air curtains for PAL Europe. Tim supplied us with the required details to match the specification needed for the installation. 

Friday 1 June 2012

FRICO Air Curtains - the new PA3500/4200

The latest FRICO Catalogue has been released and is ready for distribution.  Give Euro Controls UK Ltd a call and we will have one sent to you via post - or feel free to download this PDF for your perusal.

Euro Controls UK Ltd and FRICO have been working together for a number of years to educate the market on how air curtains used over door entrances can reduce the cost of air conditioning, prevent draughts and can minimise the build up of ice in cold rooms.

We are pleased to announce that we will be supplying the new PA3500 and PA4200 air curtain range from FRICO along with the intelligent SIRe controller.

The controller has built in functions that go way beyond turning the air curtain on and off - the SIRe will actually read the temperature outside, inside, the number of door openings and calculate the exact air flow and temperature needed to maintain a comfortable climate.

Here is a link to the SIRe controller video, along with a couple of cool pictures of the air curtain itself (spot the difference!).

FRICO PA3500

FRICO PA4200